Sirius Plumbing and Air Conditioning

Dallas-Fort Worth Plumbing & Air Conditioning Specialist

Serving DFW and Surrounding Areas: (972) 235-6600
  • Home
  • AC & Heating
    • Air Conditioning Installation
    • Air Conditioning Repair
    • Air Conditioning Tune-Up
    • AC Brands We Install
    • Heating Service and Repair
    • Heater Tune-Up
    • Heater Replacement
    • Heater Brands We Install
  • Plumbing
    • Plumbing Service & Repair
    • Tankless Water Heater Installation
    • Water Heater Service & Replacement
    • Brands We Install
  • FAQ
  • Blog
  • About
    • Sirius Comfort Care
    • How-To Video’s
    • Glossary
    • Reviews
  • Contact
    • Job Openings
  • Schedule Service

Easy Ways You Can Help Save Water

July 14, 2017 By SPAC WebAuthor Leave a Comment

Now that the summer heat is in full swing, Sirius Plumbing and Air Conditioning would like to provide some helpful water conservation tips. Below are some easy steps to take to help minimize your indoor water consumption.

Easy ways you can help save water in your kitchen:

  • Fix leaky faucets, install a water efficient faucet, or put a new low-flow aerator on your existing faucet
  • Use a basin or fill the sink to wash dishes instead of running the faucet while you’re scrubbing
  • Only wash a full load in the dishwasher – and scrape plates before loading instead of rinsing them
  • Compost the majority of your food waste and only run your garbage disposal when absolutely necessary
  • Keep a pitcher of drinking water in the fridge instead of running the faucet until it’s cold enough for drinking
  • Catch leaks right away before they cause damage and waste water and turn off the water supply to your refrigerator, ice maker, or drinking water dispenser with a FloodStop water detection system

Did you know?

  • Washing dishes by hand can actually use much more water than using a dishwasher – especially if you have an ENERGY STAR qualified model which uses an average of 1/3 LESS water than non-qualified models. You could potentially save up to 5,000 gallons of water and 230 hours of your time each year.
  • You can save up to 8 gallons of water a day simply by reusing your kitchen water. Don’t pour water down the drain when there may be another use for it. For instance, when you give your pet fresh water, reuse the old water for your houseplants.
  • It can be safer for your health AND conserve water if you thaw frozen foods in the refrigerator overnight rather than using water to defrost them.
  • Wasted food = wasted water – not only when you use your garbage disposal to dispose of food waste, but also in the amount of water it took to produce the food. Give back to the earth by composting your food waste. If you don’t have a use for compost in your yard, offer compostable materials to neighbors or community garden projects.

Easy ways you can help save water in your bathroom:

  • Install a stylish new WaterSense® certified bathroom faucet – and use it wisely by soaping up your hands before turning on the water, turning the tap off while brushing your teeth, and making sure leaks are attended to right away
  • Take shorter showers and replace your old shower heads with WaterSense® certified low-flow shower heads. Or, keep your favorite shower head and use a shower flow regulator simply installed on your existing shower arm
  • Install a water-saving flow control with your existing shower head so you can slow the water to a trickle while you’re shaving or shampooing to help conserve even more water
  • Add a ShowerStart™ system to your shower to help prevent wasting water while you’re waiting for it to heat up – or consider installing a tankless water heater for instant hot water anywhere in your home
  • Fix a leaky toilet or upgrade to a new 1.6gpf low-volume or 1.28gpf high efficiency toilet

Did you know?

  • On average, 2/3 of all the water our homes use indoors is in the bathroom – and nearly 30% of all water usage in the home is being used by toilets.
  • Fixing a toilet leak is a great way to reduce household water use and boost water conservation. If your toilet has a leak, you could be wasting about 200 gallons of water every day. That would be like flushing your toilet more than 50 times for no reason.
  • Bathroom sink faucets and accessories that use a maximum of 1.5 gallons per minute can reduce a sink’s water flow by 30 percent or more from the standard flow of 2.2 gallons per minute without sacrificing performance.
  • There are more than 300 million people in the United States. If each person reduced his or her shower time by one minute, we could save a combined 165 billion gallons each year!

Easy ways you can help save water in your home:

  • Inspect pipes regularly for leaks or damage and fix any problems right away. Take care to protect ex posed pipes from being damaged or from freezing if you live in a colder climate.
  • Know where your master shutoff valve is located. This could save water and prevent damage to your home in the event of pipes bursting, toilets or faucets leaking, or other similar instances. Also, make sure you replace worn supply lines and shutoff valves.
  • Only use your washing machine when it’s full – and install a leak detector that will shut off the water supply if ruptured hoses, cracked fittings, or even internal failures occur.
  • If you’re building a new house or remodeling, consider setting up a greywater system. These systems allow you to re-use the water from your sinks, laundry machine and dishwasher for watering house plants and flushing toilets. Alternatively, ask your plumber to re-route greywater to outdoor areas where it can water trees or bushes.

Did you know?

  • The average washing machine uses about 41 gallons of water per load, and is the second largest water user in your home. High-efficiency washing machines use 35 to 50 percent less water, as well as 50 percent less energy per load. If you are in the market for a new clothes washer, consider buying a high-efficiency, water-saving ENERGY STAR labeled model to reduce water and energy use. Also, consider a model that offers cycle and load size adjustments, which are more water-and energy-efficient.
  • ONE leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. A home with high-efficiency toilets could use that water to flush for six months!
  • Being handy around the house doesn’t have to be difficult. Common types of leaks found in the home are worn toilet flappers, dripping faucets, and other leaking valves. These types of leaks are often easily correctable, in many cases requiring only a few tools and hardware that can pay for themselves in water savings.
  • Even without modifying your plumbing, you can recycle grey water at home today if you’re willing to put a little elbow grease into it. Collect shower or bathtub water in a bucket. Dump the bucket into toilet bowls to flush the contents or use it to water the yard. HOWEVER, don’t let collected grey water sit for too long: Within 24 hours, bacteria and other pathogens can multiply, turning safe grey water into hazardous (and stinky) “blackwater.”

If you need help inspecting, repairing, or replacing fixtures or plumbing for your home, contact Sirius Plumbing & Air Conditioning at (972) 235-6600 for an appointment.

Filed Under: Uncategorized Tagged With: Common Toilet Issues, Flapper, Flood Stop, garbage disposal, kitchen sink, leaking faucet, Leaking sink, Lower water heater temperature, plumbing, plumbing Dallas Tx, plumbing services, Running Toilet, Sirius Plumbing and Air Conditioning, Tank Lever, tank water heater, tankless water heater, Water Heater, water heater flood stop, water heater leak

Kitchen Faucets 101

July 13, 2016 By SPAC WebAuthor Leave a Comment

If your family is like ours, you spend a lot of time congregating in the kitchen. This means that it is important to having everything running properly. Faucets are a common kitchen problem. Two common kitchen faucet issues that, when simple, can be diagnosed and fixed by you are leaks and abnormal water flow.

A popular faucet used today is a pull out spray. This is exactly as the name describes it, a head of a sink that can be pulled out to direct spray. If you have a leak on the faucet of a pull out spray, there a few steps you can take to fix the issue. First, you will need to turn the water off. This can be done by turning the “stops” found under the sink until water flow is stopped. Modern stops normally require a quarter turn, but if you have an older model you might have to turn for a while until the water shuts off. Now that the water is off, you can take the spray piece apart. This is a main source of leaking because when the pull out spray is used, the spray head can become loose. This is easily fixed by removing the spray head and reattaching it to ensure it is screwed on tightly. This can be done by hand, no tools required. Finally, turn on the water to check that the leak has been fixed. If the faucet it still leaking, it is time to call a plumber to find the issue.

Another issue is abnormal water flow. At the connection between the hose and the sprayer head, there is a screen that can collect debris. If there is debris behind this screen, you will need to call a plumber. If debris is on the detached head piece, you can clean this out yourself in another sink. After debris is cleared, the sprayer head can be hand tightened back on to the hose.

To keep your kitchen faucet working properly, we recommend that you check your faucet every month. If you experience any issues other than those we have discussed, you will need to contact a plumber. Here at Sirius Plumbing and Air Conditioning we are prepared to handle any issues, we have seen it all! Contact us at 972.235.6600 or for the fastest service, please fill out the service request form on our website.

Filed Under: Uncategorized Tagged With: kitchen faucet, kitchen sink, leaking faucet, leaking kitchen faucet, Leaking sink, plumbing, plumbing Dallas Tx, plumbing services, pull out spray, Sirius Plumbing and Air Conditioning, www.dictionary.com, www.diynetwork.com, www.hgtv.com, www.wikihow.com

How to Fix a Dripping or Leaky Faucet

April 14, 2016 By SPAC WebAuthor Leave a Comment

A constant dripping or leaky faucet is not only annoying, it’s costing you money. Even if you only have a drip every few seconds, it can waste up to 90 gallons of water every month—and it’s more than that for more serious leaks.

The good news is it’s an easy fix. Usually, a broken stem under one of the handles causes the leak. Here, we’ll look at how to fix a broken or corroded faucet stem.

  • Step 1: Turn it fully off: Before doing anything, make sure the faucet is turned completely off. Sometimes, a leak is simply due to one of the handles being slightly on.
  • Step 2: Check the stems: If turning it off doesn’t stop the drip, then one of the stems is likely broken or corroded. To check whether it’s the hot or cold water stem, go under the sink and turn off the hot water. If it stops leaking, then the stem under the hot water handle is the problem. If it keeps leaking, turn the hot water back on and then turn the cold water off.
  • Step 3: Take apart the handle: Once you’ve found which stem is causing the problem, use a screwdriver to take apart the handle. Before taking the handle off, make sure you turn it to the “on” position to release any pressure in the line.
  • Step 4: Remove the stem: After removing the handle, you’ll see a small metal post. That’s your stem. Use a wrench to loosen the bolt (it’ll be very tight!) and take the stem out. After that, take it to your local hardware store.
  • Step 5: Get a new stem: Compare sizes to make sure you get the correctly sized stem (your store should have a way to measure that). While you’re there, get some plumber’s grease, too.
  • Step 6: Replace the stem: Apply the grease to the O ring at the bottom of the stem, the thread, and the washer around its base. Replace the stem and use your wrench to tighten it. You don’t want it too tight, though—you’ll need a little wiggle room to make sure it’s aligned.
  • Step 7: Replace the handle: Put the old handle back on and tighten it to make sure it’s aligned correctly. If it’s not, take it off and tighten the stem a little more. Once you have the handle in proper alignment, turn the water back on under the sink.

Congratulations! You now have a non-leaking, fully functional sink!

If you don’t want to fix this yourself, or have another plumbing problem, we are happy to help. Give us a call at Sirius Plumbing and Air Conditioning for your plumbing needs!

Filed Under: Uncategorized Tagged With: leaking faucet, Leaking sink, plumbing, plumbing Dallas Tx, plumbing services

Schedule Service

  • This field is for validation purposes and should be left unchanged.

Recent Posts

  • It’s Time for Winter Maintenance
  • Thank a Yankee for our Cool Buildings on a Hot Day
  • Easy Ways You Can Help Save Water
  • Is Your Central AC System the Right Size?
  • Spring Has Sprung

Serving the cities of...
Dallas, Plano, Carrollton, Richardson, Garland, Allen, Frisco, McKinney, Lewisville, Flower Mound, Coppell, University Park, Highland Park, Fort Worth, Richland Hills, North Richland Hills, Arlington, Hurst, Bedford, Euless, Colleyville, Keller, Southlake, Grapevine, Trophy Club, and surrounding DFW communities.

Sirius Plumbing and Air Conditioning
1406 Halsey Way, Suite 100
Carrollton, TX 75007
972-235-6600 - DFW

Contractor Licenses
TACLB010369E
M-18876

Copyright © 2017 Sirius Plumbing and Air Conditioning | Terms of Use | Privacy Policy